Toyota AVALON 2008 Quick Reference Manual Download Page 295

Page: 295 / 472

270

3-6. Other interior features

AVALON_U_(L/O_0802)

Climate control seats/seat heaters (if equipped)

The seat heaters and ventilators heat the seats and maintain good

airflow by blowing air from the seats.

Vehicles with ventilator

Press the knob to release it,
and turn the knob to the
desired temperature setting.

OFF

Press the knob to lock it when
not in use.

Ventilation

Warm air

Vehicles without ventilator

Press the knob to turn the sys-
tem on, and turn the knob to
the desired temperature set-
ting.

The further you turn the knob
clockwise, the warmer the seat
temperature becomes. Press
the knob again to turn the sys-
tem off.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands