Toyota AVALON 2008 Quick Reference Manual Download Page 126

Page: 126 / 472

1-7. Safety information

Before driving

AVALON_U_(L/O_0802)

Child restraint systems

Points to remember

Studies have shown that installing a child restraint on a rear seat is
much safer than installing one to the front passenger seat.

Choose a child restraint system appropriate to the age and size of
the child.

For installation details, follow the instructions provided with the
child restraint system.

General installation instructions are provided in this manual.

(

→

P. 102)

Types of child restraints

Child restraint systems are classified into the following 3 types
according to the age and size of the child.

Infant seat

A child restraint system for a small child or baby must itself be prop-

erly restrained on the seat with the lap portion of the lap/shoulder

belt.

The laws of all 50 states of the U.S.A. and Canada now require the

use of child restraint systems.

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands