Toyota AVALON 2008 Quick Reference Manual Download Page 390

Page: 390 / 472

W
h

en
t

ub
le

ise
s

367

5-1. Essential information

AVALON_U_(L/O_0802)

Fuel pump shut off system

Follow the procedure below to restart the engine after the system is
activated.

Switch to ACC mode or OFF.

Restart the engine.

NOTICE

Before starting the engine

Inspect the ground under the vehicle.

If you find that fuel has leaked on to the ground, the fuel system has been
damaged and is in need of repair. Do not restart the engine.

To minimize the risk of fuel leakage when the engine stalls or an air-

bag inflates upon collision, the fuel pump shut off system stops sup-

plying fuel to the engine.

STEP

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands