Toyota AVALON 2008 Quick Reference Manual Download Page 82

Page: 82 / 472

1-3. Adjustable components (seats, steering wheel, mirrors)

Before driving

AVALON_U_(L/O_0802)

Seat belt comfort guide (outside rear seats)

If the shoulder belt sits close to a person’s neck, use the seat belt
comfort guide.

Pull the comfort guide from the
pocket.

Slide the belt past the slot of the
guide.

The elastic must be behind the
seat belt.

Adjusting the height of the belt (front seats)

Down

Move the height adjuster up
and down as needed until you
hear a click.

STEP

Summary of Contents for AVALON 2008

























































































































































































































































































































































































































































































Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands

Toyota AVALON 2008, Quick Reference Manual

Search results

Summary of Contents for AVALON 2008

Reviews:

Brands by name

Popular brands