Toshiba Strata CTX100, Installation And Maintenance Manual

Page: 309 / 348

Station Apparatus
2000-series Telephones
Strata CTX I&M 10/02
8-47
➤
To toggle full/half-duplex mode
➤
Press button 10 (see Figure 8-41 ) to turn full-duplex mode On or Off.
Full-duplex mode: Button 10 LED Off.
Half-duplex mode: Button 10 LED On.
Notes
●
Button 10 functions the same for Internal and/or External Microphone.
●
If DIP switch 6 and 7, in Figure 12, are turned Off, the Full/half-duplex function of Button 10
is disabled.
●
The DKT2020-FDSP’s full-duplex operation depends on the speaker volume setting. Raising
or lowering the speaker volume directly affects the performance of the full-duplex operation.
Important!
•
If raising or lowering the volume does not improve performance, switch to half-duplex mode by
pressing Key 10.
•
If both you and the distant party are using full-duplex speakerphones, the sensitivity to both
echo paths may cause a reduction or instability of volume. If this happens, it may be necessary
to switch to half-duplex mode by pressing key 10.
Digital Single Line Telephone (DKT2001 only)
For instructions on installing the DKT3001 SLT, see “Digital Telephone System Connection” on
page 8-2 .
DKT 2001 Installation
1. Set the DIP switches to match Figure
8-42 . The DIP switches are preset from
the factory for the USA and Canada.
Refer to
Table 8-10 on page 8-42 for
other country settings.
2. If required to achieve maximum
distance (greater than 1000 ft.), install a
two-pair house cable (or external
power).
3482
1
ON
2 3 4
1
ON
2 3 4
Figure 8-42 DKT2001 DIP Switch Settings