Toshiba Strata CTX100, Installation And Maintenance Manual

Page: 281 / 348

Station Apparatus
3000-series Telephone Settings
Strata CTX I&M 10/02
8-19
Statio
n Appa
ratus
Test the Display on Large LCD Telephones (DKT3014-SDL only)
1. Press + + +
+ROG
(simultaneously).
2. Press
3DJH
.
3. Press . LCD screen is blank.
4. Press . Each segment shows three vertical lines, in all eight rows.
5. Press . Each segment contains five short horizontal lines, in all eight rows.
6. Press . Each segment contains a pattern of small dots, in all eight rows.
7. Press . All of the available characters, including numbers, display.
8. Go off-hook, then on-hook to exit the program mode.
Reset and Adjust the LCD Contrast
Step 1:
Adjust LCD Contrast for the LCD Telephones
1. Press and hold down the
0LF
button, and press and release
9RO
▲
or
9RO
▼
repeatedly.
Each time you press
9RO
▲
or
9RO
▼
, the contrast increases or decreases. There are eight steps
in either direction. To return to the middle setting, repeat “Step 1” above.
2. Press
+ROG
to reset the LCD contrast.
3. Go off-hook, then on-hook to exit the program mode.
Step 2:
Reset LCD Contrast for the DKT3014-SDL
1. Press + + +
+ROG
(simultaneously).
2. Press
0RGH
.
3. Press
0VJ
so that the
0VJ
LED is On.
4. Press
+ROG
. This sets the LCD lightness/darkness contrast on the middle setting.
5. Go off-hook, then on-hook to exit the program mode.
Country Settings On/Off
This procedure enables you to change the country settings for telephone CODEC operation in
various countries, see
Table 8-7 .
1. Press + + +
+ROG
(simultaneously).
2. Press .
3. Press Feature Buttons 1~4 (FB1~FB4) On/Off according to the Table below
...or, for the DKT3001, pressing ~ and toggle the
0VJ
LED On/Off (see following)
press (
0VJ
LED Off means that FB1 is Off)
press (
0VJ
LED Off means that FB2 is Off)
press (
0VJ
LED Off means that FB3 is Off)
press (
0VJ
LED Off means that FB4 is Off)
4. Press
+ROG
to set the option.
5. Go off-hook, then on-hook to exit the program mode.