Toshiba Strata CTX100, Installation And Maintenance Manual

Page: 67 / 348

Strata CTX Configuration
Primary/Reserve Power Cabinet Hardware
Strata CTX I&M 10/02
1-51
Str
a
ta CT
X
C
o
nfigu
ration
CTX670 Cabinet AC Power Component Requirements for Wall
Mounted Systems
Tables 1-67 and 1-68 show the cabinet parts required to distribute AC power for various
configurations of the Strata CTX cabinets.
Important!
The plugs and wall receptacles required by the local electrical code might differ for
208VAC and 240VAC. Thus in some areas of the U.S., the plug used on the Toshiba
240VAC power strip and 240VAC power supply cord (NEMA code 6-20P) can not
be used for 208VAC installations. In this case, when using 208VAC, the AC plugs
on the BPSB240 power strip cord that connects directly to the 208VAC wall outlet
must be changed by a certified electrician per the local electrical code.
Cabinet AC Power Component Installation
After the cabinets have been floor mounted, the AC power components should be installed Tables
1-69 and 1-70 show the primary AC power components required for floor mounted systems.
Table 1-67 Wall Mount Cabinet Power Component Requirements for 120VAC Primary Power
Local Electrical Code 1 Cabinet 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets 7 Cabinets
Allows only one
120VAC power cord
from system
0 RPSB2 1 RPSB2 1 RPSB2 N/A N/A N/A N/A
Allows two 120VAC
power cords from
system
0 RPSB2 0 RPSB2 1 RPSB2 1 RPSB2 2 RPSB2 N/A N/A
●
One dedicated, isolated, 20 amp. AC circuit breaker with dual outlets is required.
●
N/A= If the system contains more than three cabinets and if the local code allows only one AC cord, the system requires a
BCCB120 conduit box wired by a certified electrician when using 120VAC as primary power. Otherwise, 208VAC or 240VAC
should be used as the primary power source (see cabinet power options listed below). If more than five cabinets are installed,
208VAC or 240VAC is required.
Table 1-68 Wall Mount Cabinet Power Component Requirements for 208VAC or
240VAC Primary Power
Local Electrical Code 1 Cabinet 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets 7 Cabinets
Allows One AC power
cord from system
1 BACL240
1 BPSB240
2 BACL240
1 BPSB240
3 BACL240
2 BPSB240
4 BACL240
2 BPSB240
5 BACL240
3 BPSB240
6 BACL240
3 BPSB240
7 BACL240
Table 1-69 Floor Mount Cabinet Component Requirements for 120VAC Primary Power
Local Electrical
Code
1 Cabinet 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets 7 Cabinets
3 or more
cabinets require
a conduit box
1 – BFIF 1 – BFIF
1 -BCCB120
1
1 – BFIF
1 – BCCB120
1
1 – RPSB2
1 – BFIF
1. A BCCB120 conduit connection box must be installed and wired by a certified electrician per the local electrical code.
1 – BCCB120
1
2 – RPSB2
1 – BFIF
1 – BCCB120
1
2 – RPSB2
1 – BFIF
N/A
Table 1-70 Floor Mount Cabinet Component Requirements for 208VAC or 240VAC Primary Power
Local
Electrical Code
1 Cabinet 2 Cabinets 3 Cabinets 4 Cabinets 5 Cabinets 6 Cabinets 7 Cabinets
3 or more
cabinets require
a conduit box
1 – BACL240
1 – BFIF
1 – BCCB240
1
2 – BACL240
1 – BFIF
1. A BCCB240 conduit connection box must be installed and wired by a certified electrician per the local electrical code.
1 – BCCB240
1
1 – BPSB240
3 – BACL240
1 – BFIF
1 – BCCB240
1
1 – BPSB240
4 – BACL240
1 – BFIF
1 – BCCB240
1
2 – BPSB240
5 – BACL240
1 – BFIF
1 – BCCB240
1
2 – BPSB240
6 – BACL240
1 – BFIF
1 – BCCB240
1
3 – BPSB240
7 – BACL240
1 – BFIF