Toshiba PQX31U-00U00C User Manual Download

Page: 153 / 220

User’s Manual

8-15

Optional Devices

Connecting an eSATA cable to the USB (eSATA combo) port

Disconnecting an eSATA device

When you have finished using an eSATA device, you can follow the

procedures below in order to disconnect it:
1. Wait for the indicator light of an eSATA device to go out to make sure all

activity has stopped.

2. Click the

Safely Remove Hardware

icon on the Windows Taskbar.

3. Click an eSATA device that you want to remove.
4. Carefully pull an eSATA device's USB (eSATA combo) connector out

from within the computer's USB (eSATA combo) port.

eSATA/USB

combo port

eSATA cable

■

A connected eSATA device may not be recognized if it is connected to

the computer's eSATA/USB combo port while the computer is in Sleep

Mode or Hibernation Mode. If this occurs, disconnect the eSATA device

and then reconnect the device while the computer is turned on.

■

If you connect an eSATA device after the computer has already been

turned on, it will take about ten seconds for it to be recognized by the

computer.

Do not attempt to disconnect and reconnect the drive before this period

has elapsed.

If you disconnect an eSATA device or turn off the power while the

computer is accessing the drive you may lose data or damage an eSATA

device or the drive.

Summary of Contents for PQX31U-00U00C





























































































































































































































Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands

Toshiba PQX31U-00U00C, User Manual

Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands