manualshive.com logo in svg

Toshiba PQX31U-00U00C, User Manual

The Toshiba PQX31U-00U00C User Manual is a comprehensive guide for operating and optimizing this exceptional product. With step-by-step instructions and detailed explanations, users can easily navigate through its features. Download this manual for free from our website, ensuring a seamless and hassle-free experience with your device.

Share
Download
background image

User’s Manual

1-9

Introduction

Security 

Special features

The following features are either unique to TOSHIBA computers or are 

advanced features which make the computer more convenient to use.
Access each function using the following procedures.
*1 To access the Power Options, click 

Start

   

Control Panel

   

System 

and Maintenance

   

Power Options

.

Wireless LAN

Some computers in this series are equipped with 

a Wireless LAN module that is compatible with 

other LAN systems based on Direct Sequence 

Spread Spectrum/Orthogonal Frequency Division 

Multiplexing radio technology that complies with 

the IEEE 802.11 Standard.

The transmission speed over the wireless LAN and the distance over 

which wireless LAN can reach may vary depending on surrounding 

electromagnetic environment, obstacles, access point design and 

configuration, and client design and software/hardware configurations. 

The Transmit Rate (at X Mbit/s) is the theoretical maximum speed under 

the IEEE802.11 (a/b/g) standard. The actual transmission speed will be 

lower than the theoretical maximum speed. 

Legal Footnote (Wireless LAN)

*7

For more information regarding Wireless LAN, please refer to the 

Legal 

Footnotes

 section in Chapter 10 or click the *7 above.

Wireless 

communication 

switch

This switch turns the Wireless LAN and 

Bluetooth functions on and off. Please note that 

all models are provided with a Wireless 

communication switch and some models are 

equipped with both Wireless LAN and Bluetooth 

functionality.

Security lock slot

Connects a security lock to anchor the computer 

to a desk or other large object.

USB Sleep and 

Charge function

This feature allows you to charge USB-

compatible external devices such as mobile 

phones or portable digital music players via the 

USB port when your computer is in 

Sleep Mode

, 

Hibernation Mode

 or in the shutdown state.

To run the HW Setup program, click 

Start

   

All 

Programs

   

TOSHIBA

   

Utilities

   

HWSetup

.

Summary of Contents for PQX31U-00U00C





























































































































































































































Reviews:

No comments

Related manuals for PQX31U-00U00C

Medion Akoya E4212 Quick Start Manual preview
Akoya E4212
Brand: Medion Pages: 2
Fujitsu Siemens Computers LITELINE Series Operating Manual preview
LITELINE Series
Brand: Fujitsu Siemens Computers Pages: 64
Acer TravelMate 8571 Service Manual preview
TravelMate 8571
Brand: Acer Pages: 98
Acer TravelMate 7510 User Manual preview
TravelMate 7510
Brand: Acer Pages: 94
Acer TravelMate 6592G Series Service Manual preview
TravelMate 6592G Series
Brand: Acer Pages: 148
Acer TravelMate 2300 Series User Manual preview
TravelMate 2300 Series
Brand: Acer Pages: 95
Acer TravelMate 5740 Series Quick Manual preview
TravelMate 5740 Series
Brand: Acer Pages: 314
Acer A315-56 User Manual preview
A315-56
Brand: Acer Pages: 73
Acer Aspire 5235 Service Manual preview
Aspire 5235
Brand: Acer Pages: 156
Acer TravelMate 4350 User Manual preview
TravelMate 4350
Brand: Acer Pages: 2286
Toshiba A305-S6834 - Satellite - Core 2 Duo 1.83 GHz Specifications preview
A305-S6834 - Satellite - Core 2 Duo 1.83 GHz
Brand: Toshiba Pages: 3
Toshiba A305-S6909 Specifications preview
A305-S6909
Brand: Toshiba Pages: 4
Toshiba A305-S6908 Specifications preview
A305-S6908
Brand: Toshiba Pages: 4
Toshiba A305-S6864 Specification preview
A305-S6864
Brand: Toshiba Pages: 4
Toshiba A305-S6898 Specifications preview
A305-S6898
Brand: Toshiba Pages: 4
Toshiba A305-S6863 Specifications preview
A305-S6863
Brand: Toshiba Pages: 4
Toshiba A305-S6902 Specifications preview
A305-S6902
Brand: Toshiba Pages: 4
Toshiba A305-S6857 - Satellite - Core 2 Duo GHz Specifications preview
A305-S6857 - Satellite - Core 2 Duo GHz
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands