manualshive.com logo in svg

Toshiba PQX31U-00U00C, User Manual

The Toshiba PQX31U-00U00C User Manual is a comprehensive guide for operating and optimizing this exceptional product. With step-by-step instructions and detailed explanations, users can easily navigate through its features. Download this manual for free from our website, ensuring a seamless and hassle-free experience with your device.

Share
Download
background image

User’s Manual

8-13

Optional Devices

Using the USB floppy diskette drive

The USB floppy diskette drive accommodates either a 1.44 MB or 720 KB 

floppy diskette and connects to one of the computer's USB ports.

Connecting the USB floppy diskette drive

To connect the drive, plug the floppy diskette drive's USB connector into 

one of the computer's free USB ports.

USB connector

Insert this connector into one of the free USB 

ports of your computer.

Disk-In-Use Indicator

This indicator glows when the floppy diskette is 

being accessed.

Floppy diskette slot

Insert a floppy diskette into this slot.

Eject button

When a floppy diskette is fully seated in the 

drive, the eject button will pop out. In order to 

remove the diskette, push the eject button in 

order to cause it to partially pop out of the drive 

and then remove it.

Check the 

Disk-In-Use

 indicator when you use the floppy diskette drive. 

Do not press the eject button or turn off the computer while the light is 

glowing. Doing so could destroy data and damage the floppy diskette or 

the drive.

In use, the following should be noted regarding the operation of the USB 

floppy diskette drive:

■

The drive should be placed on a flat, horizontal surface.

■

Do not set the drive on an incline greater than 20° while it is operating.

■

Do not place anything on top of the drive.

Make sure the connector is right side up and properly aligned with the 

socket. Do not try to force the connection; doing so can damage the 

connecting pins.

Summary of Contents for PQX31U-00U00C





























































































































































































































Reviews:

No comments

Related manuals for PQX31U-00U00C

Acer Aspire One AOP531h Quick Manual preview
Aspire One AOP531h
Brand: Acer Pages: 12
EVGA SC17 Gaming Manual preview
SC17 Gaming
Brand: EVGA Pages: 15
EUROCOM D870P MIRAGE Service Manual preview
D870P MIRAGE
Brand: EUROCOM Pages: 96
IBM THINKPAD 92P1956 Manual preview
THINKPAD 92P1956
Brand: IBM Pages: 10
NEC Versa E6000 Disassembly Manual preview
Versa E6000
Brand: NEC Pages: 27
Conrad Electronic 77 54 64 Operating Instructions preview
77 54 64
Brand: Conrad Electronic Pages: 3
Toshiba A9-S9013 Specifications preview
A9-S9013
Brand: Toshiba Pages: 8
Philips SPC610NC Specifications preview
SPC610NC
Brand: Philips Pages: 2
Philips PD9030 Specifications preview
PD9030
Brand: Philips Pages: 3
Philips 13NB4602 Specifications preview
13NB4602
Brand: Philips Pages: 2
Philips 13NB3602 Specifications preview
13NB3602
Brand: Philips Pages: 2
Philips 11NB9504 Specifications preview
11NB9504
Brand: Philips Pages: 2
Philips 11NB7602 Specifications preview
11NB7602
Brand: Philips Pages: 2
Philips SPC610NC User Manual preview
SPC610NC
Brand: Philips Pages: 22
Philips PD9030 User Manual preview
PD9030
Brand: Philips Pages: 32
Sharp Actius PC-AV18P Specifications preview
Actius PC-AV18P
Brand: Sharp Pages: 2
Sharp Actius PC-MV14 Supplement Manual preview
Actius PC-MV14
Brand: Sharp Pages: 12
Sharp PC-9080 Manual preview
PC-9080
Brand: Sharp Pages: 114

Brands by name

Popular brands

Load more brands