Toshiba PQX31U-00U00C User Manual Download Page 42

Page: 42 / 220

User’s Manual

2-6

The Grand Tour

DC IN 19V jack

The AC adaptor connects to this jack in order to

power the computer and charge its internal

batteries. Please note that you should only use

the model of adaptor supplied with the computer

at the time of purchase - using the wrong adaptor

can cause damage to the computer.

Cooling vents

The computer's cooling vents help keep the

processor from overheating.

Do not block the cooling vents. Keep foreign metal objects, such as

screws, staples and paper clips, out of the cooling vents. Foreign metal

objects can create a short circuit, which can cause damage and fire,

possibly resulting in serious injury.

HDMI out port

HDMI out port can connect with Type A

connector HDMI cable.HDMI cable can send

video and audio signals. In addition to this, it can

send and receive control signals.

Display port (optional)

Some models are equipped with a Display port.

Display port (DP) can connect DP connector with

DP cable. DP cable can send video signals. In

addition to this, it can send and receive control

signals.

External monitor port

This port allows you to connect an external video

display to the computer.

LAN jack

This jack lets you connect to a LAN. The adaptor

has built-in support for Ethernet LAN

(10 megabits per second, 10 BASE-T), Fast

Ethernet LAN (100 megabits per second,

100 BASE-TX) and Gigabit Ethernet LAN

(1000 megabits per second, 1000 BASE-T). The

LAN has two indicators. Refer to Chapter 4,

Operating Basics

, for details.

■

Do not connect any cable other than a LAN cable to the LAN jack. It

could cause damage or malfunction.

■

Do not connect the LAN cable to a power supply. It could cause

damage or malfunction.

Link indicator (green)

This indicator glows green when the computer is

connected to a LAN and the LAN is functioning

properly.

LAN active indicator

(orange)

This indicator glows yellow when data is being

exchanged between the computer and the LAN.

Summary of Contents for PQX31U-00U00C





























































































































































































































Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands

Toshiba PQX31U-00U00C, User Manual

Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands