Toshiba PQX31U-00U00C User Manual Download

Page: 152 / 220

User’s Manual

8-14

Optional Devices

Connecting the USB floppy diskette drive

Disconnecting the USB floppy diskette drive

When you have finished using the USB floppy diskette drive, you can follow

the procedures below in order to disconnect it:
1. Wait for the Disk-In-Use Indicator light to go out to make sure all floppy

diskette activity has stopped.

2. Click the

Safely Remove Hardware

icon on the Task Bar.

3. Click the USB floppy diskette drive device that you want to remove.
4. Carefully pull the floppy diskette drive's USB connector out from within

the computer's USB port.

eSATA (External Serial ATA)

An device corresponding to eSATA function can be connected to the USB

(eSATA combo) port on the computer.

Connecting the eSATA device

To connect an eSATA device, follow the steps as detailed below:
1. Connect an eSATA cable to the eSATA/USB combo port.

USB port

USB connector

If you connect the USB floppy diskette drive after the computer has

already been turned on, it will take about ten seconds for it to be

recognized by the computer. Do not attempt to disconnect and reconnect

the drive before this period has elapsed.

If you disconnect the floppy diskette drive or turn off the power while the

computer is accessing the drive you may lose data or damage the floppy

diskette or the drive.

Make sure the connector is properly aligned with the socket.Do not try to

force the connection, doing so can damage the connecting pins.

Summary of Contents for PQX31U-00U00C





























































































































































































































Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands

Toshiba PQX31U-00U00C, User Manual

Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands