Toshiba PQX31U-00U00C User Manual Download

Page: 64 / 220

User’s Manual

3-13

Getting Started

1. Turn off the computer.
2. Turn on the computer and when the TOSHIBA screen appears

repeatedly press the

key.

3. The

Advanced Boot Options

menu will be displayed.

Use the arrow keys to select

Repair Your Computer

and press

ENTER

4. Select your preferred keyboard layout and press

Next

5. To access the recovery process please log on as an enabled user with

sufficent rights.

6. Click TOSHIBA HDD Recovery on the System Recovery Options

screen.

7. Follow the on-screen instructions on the TOSHIBA HDD Recovery

dialog.

The computer will be restored to its factory state.

Ordering Recovery Discs from TOSHIBA*

You can order Product Recovery discs for your notebook from the
TOSHIBA Europe Backup Media Online Shop.

1. Visit

https://backupmedia.toshiba.eu

on the Internet.

2. Follow the on-screen instructions.
You will receive your Recovery Discs within two weeks after placing your

order.

Restoring the pre-installed software from your ordered
Recovery Discs

If the pre-installed files are damaged, you are able to use the Recovery

Discs you have ordered to restore the computer to the state it was in when

you originally received it. To perform this restoration, follow the steps

below:

1. Load the Recovery Discs into the optical disc drive and turn off the

computer's power.

2. While holding down

F12

key on the keyboard, turn on your computer -

when the

TOSHIBA

logo screen appears, release the

F12

key.

Please set your BIOS to default before you recover your computer to the

factory state!

* Please note that this service is not free-of-charge.

When the sound mute feature has been activated by pressing the

ESC

key, be sure to disable this to allow sounds to be heard before

starting the restore process. Please refer to Chapter 5,

The Keyboard

, for

further details.

When you reinstall the Windows operating system, the hard disk will be

reformatted and all data will be lost.

Summary of Contents for PQX31U-00U00C





























































































































































































































Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands

Toshiba PQX31U-00U00C, User Manual

Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands