manualshive.com logo in svg

Toshiba PQX31U-00U00C, User Manual

The Toshiba PQX31U-00U00C User Manual is a comprehensive guide for operating and optimizing this exceptional product. With step-by-step instructions and detailed explanations, users can easily navigate through its features. Download this manual for free from our website, ensuring a seamless and hassle-free experience with your device.

Share
Download
background image

User’s Manual

6-6

Power

Charging the batteries

When the power in the battery pack becomes low, the 

Battery

 indicator will 

flash amber to indicate that only a few minutes of battery power remain. If 

you continue to use the computer while the 

Battery

 indicator flashes, the 

computer will enable Hibernation Mode so that you do not lose any data, 

and automatically turn itself off.
You must recharge a battery pack when it becomes discharged.

Procedures

To recharge a battery pack while it is installed in the computer, connect the 

AC adaptor to the DC IN 19V jack and plug the other end into a working 

outlet - the 

Battery

 indicator will glow amber while the battery is being 

charged.

Time

The following table shows the approximate time required to fully charge a 

discharged battery.

Charging time (hours)

Battery charging notice

The battery may not begin charging immediately under the following 

conditions:

■

The battery is extremely hot or cold (if the battery is extremely hot, it 

might not charge at all). To ensure the battery charges to its full 

capacity, you should charge it at room temperature of between 5° to 

35°C (41° to 95°F).

■

The battery is nearly completely discharged. In this instance you should 

leave the AC adaptor connected for a few minutes and the battery 

should begin charging.

Use only the computer connected to an AC power source or the optional 

TOSHIBA Battery charger to charge the battery pack. Never attempt to 

charge the battery pack with any other charger.

Battery type

Power on

Power off

Battery Pack

about 12.0 or longer

about 4.0

RTC battery

24

about 24 with AC or 

Battery pack

Please be aware that the charging time when the computer is on is 

affected by ambient temperature, the temperature of the computer and 

how you are using the computer - if you make heavy use of external 

devices for example, the battery might scarcely charge at all during 

operation. Please refer to the section 

Maximizing battery operating time

 

for further information.

Summary of Contents for PQX31U-00U00C





























































































































































































































Reviews:

No comments

Related manuals for PQX31U-00U00C

Panasonic Toughbook CF-29LCQGCBM Software Manual preview
Toughbook CF-29LCQGCBM
Brand: Panasonic Pages: 3
IBM ThinkPad A22e Hardware Maintenance Manual preview
ThinkPad A22e
Brand: IBM Pages: 142
ANSMANN FLEX LIGHT Instruction Manual preview
FLEX LIGHT
Brand: ANSMANN Pages: 10
Acer TravelMate 4070 Manual Do Utilizador preview
TravelMate 4070
Brand: Acer Pages: 80
Acer TravelMate 4070 Guía Del Usuario preview
TravelMate 4070
Brand: Acer Pages: 77
Acer TravelMate 4070 Manuel D'Utilisation preview
TravelMate 4070
Brand: Acer Pages: 79
Acer TravelMate 4060 User Manual preview
TravelMate 4060
Brand: Acer Pages: 68
Acer TravelMate 430 User Manual preview
TravelMate 430
Brand: Acer Pages: 80
Acer TravelMate 4400 Manuel D'Utilisation preview
TravelMate 4400
Brand: Acer Pages: 63
Acer TravelMate 430 Guía Del Usuario preview
TravelMate 430
Brand: Acer Pages: 82
Acer TravelMate 430 Manuel D'Utilisation preview
TravelMate 430
Brand: Acer Pages: 82
Acer TravelMate 4400 Manual Do Utilizador preview
TravelMate 4400
Brand: Acer Pages: 63
Asus E2469 Hardware User'S Manual preview
E2469
Brand: Asus Pages: 67
Asus E18307 E-Manual preview
E18307
Brand: Asus Pages: 94
Asus E14573 E-Manual preview
E14573
Brand: Asus Pages: 102
Asus E15162 Manual preview
E15162
Brand: Asus Pages: 102
Asus E12461 E-Manual preview
E12461
Brand: Asus Pages: 98
Asus E17888 E-Manual preview
E17888
Brand: Asus Pages: 116

Brands by name

Popular brands

Load more brands