Toshiba PQX31U-00U00C User Manual Download

Page: 143 / 220

User’s Manual

8-5

Optional Devices

Memory media

This section provides the important safety precautions in order to handle

your memory media.

Points to note about the SD/SDHC memory card

SD/SDHC memory cards comply with SDMI (Secure Digital Music

Initiative), which is a technology adopted to prevent unlawful copy or

playback of digital music. For this reason, you cannot copy or playback

protected material on another computer or other device, and you may not

reproduce any copyrighted material except for your personal enjoyment.
Below is a simple explanation for distinguishing SD memory cards from

SDHC memory cards.

■

SD and SDHC memory cards appear the same externally.

■

The logo on SD and SDHC memory cards is different, so pay careful

attention to the logo when purchasing.

■

The maximum capacity of SD memory cards is 2 GB. The maximum

capacity of SDHC memory cards is 16 GB.

Memory media format

New media cards are formatted according to specific standards. If you wish

to reformat a media card, be sure to do so with a device that uses media

cards.

Formatting an SD/SDHC memory card

SD/SDHC memory cards are sold already formatted in conformity to

specific standards.If you reformat an SD/SDHC memory card, be sure to

reformat with a device such as a digital camera or digital audio player that

uses SD/SDHC memory cards instead of the format command provided in

the Windows® operating system.

■

The SD memory card logo is (

■

The SDHC memory card logo is (

Card Type

Capacities

8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB,

512 MB, 1 GB, 2 GB

SDHC

4 GB, 8 GB, 16 GB

Summary of Contents for PQX31U-00U00C





























































































































































































































Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands

Toshiba PQX31U-00U00C, User Manual

Search results

Summary of Contents for PQX31U-00U00C

Reviews:

Related manuals for PQX31U-00U00C

Brands by name

Popular brands