Toshiba GRL100-701B, Instruction Manual

Page: 444 / 473


443

6 F 2 S 0 8 5 0
List of Information
IEC103 Configurator Default setting
INF Description Contents
GI Type COT FUN DPI
ID Signal No. OFF ON
Standard Information numbers in monitor direction
System Function
0 End of General Interrogation Transmission completion of GI items. -- 8 10 255 -- -- --
0 Time Synchronization Time Synchronization ACK. -- 6 8 255 -- -- --
2 Reset FCB Reset FCB(toggle bit) ACK -- 5 3 192 -- -- --
3 Reset CU Reset CU ACK -- 5 4 192 -- -- --
4 Start/Restart Relay start/restart -- 5 5 192 -- -- --
5 Power On Relay power on. Not supported -- -- --
Status Indications
16 Auto-recloser active
If it is possible to use auto-recloser, this item is set
active, if impossible, inactive.
GI 1 1, 9, 11, 12 192 1411 1 2
17 Teleprotection active
If protection using telecommunication is available,
this item is set to active. If not, set to inactive.
GI 1 1, 9, 12 192 1412 1 2
18 Protection active
If the protection is available, this item is set to
active. If not, set to inactive.
GI 1 1, 9, 12 192 1413 1 2
19 LED reset Reset of latched LEDs -- 1 1, 11, 12 192 1409 -- 2
20 Monitor direction blocked
Block the 103 transmission from a relay to control
system. IECBLK: "Blocked" settimg.
GI 1 9, 11 192 1241 1 2
21 Test mode
Transmission of testmode situation froma relay to
control system. IECTST "ON" setting.
GI 1 9, 11 192 1242 1 2
22 Local parameter Setting
When a setting change has done at the local, the
event is sent to control system.
Not supported
23 Characteristic1 Setting group 1 active GI 1 1, 9, 11, 12 192 1243 1 2
24 Characteristic2 Setting group 2 active GI 1 1, 9, 11, 12 192 1244 1 2
25 Characteristic3 Setting group 3 active GI 1 1, 9, 11, 12 192 1245 1 2
26 Characteristic4 Setting group 4 active GI 1 1, 9, 11, 12 192 1246 1 2
27 Auxiliary input1 Binary input 1 No set
28 Auxiliary input2 Binary input 2 No set
29 Auxiliary input3 Binary input 3 No set
30 Auxiliary input4 Binary input 4 No set
Supervision Indications
32 Measurand supervision I Zero sequence current supervision GI 1 1, 9 192 1267 1 2
33 Measurand supervision V Zero sequence voltage supervision GI 1 1, 9 192 1268 1 2
35 Phase sequence supervision Negative sequence voltage supevision GI 1 1, 9 192 1269 1 2
36 Trip circuit supervision Output circuit supervision Not supported
37 I>>backup operation Not supported
38 VT fuse failure VT failure GI 1 1, 9 192 891 1 2
39 Teleprotection disturbed CF(Communication system Fail) supervision GI 1 1, 9 192 226 1 2
46 Group warning Only alarming GI 1 1, 9 192 1258 1 2
47 Group alarm Trip blocking and alarming GI 1 1, 9 192 1252 1 2
Earth Fault Indications
48 Earth Fault L1 A phase earth fault No set
49 Earth Fault L2 B phase earth fault No set
50 Earth Fault L3 C phase earth fault No set
51 Earth Fault Fwd Earth fault forward Not supported
52 Earth Fault Rev Earth fault reverse Not supported
www
. ElectricalPartManuals
. com