e-STUDIO170F Troubleshooting
January 2005 © TOSHIBA TEC
11 - 44
PAPER SIZE ERROR OR
PAPER JAM XX
During printing, the recording paper
dose not feed turned ON/OFF the
sensor within the specified time. “XX”
specify the cause of paper jam.
Check the error code displayed on the
LCD and refer to
P.11-45 "[ 3 ]
Paper jam error codes". And then
remove the jammed recording paper.
UPPER PAPER EMPTY
(Displayed only when optional
recording paper tray is installed)
The paper end sensor in the record-
ing paper tray has turned OFF.
Supply recording paper to the record-
ing paper tray.
If the same error message is displayed
again after supplying recording paper,
refer to
P.11-52 "[ 5 ] UPPER
PAPER EMPTY".
LOWER PAPER EMPTY
(Displayed only when optional
recording paper tray is installed)
The optional paper end sensor in the
optional recording paper tray has
turned OFF. Or the optional tray sen-
sors turned OFF.
Supply recording paper to the optional
recording paper tray. Or insert record-
ing paper tray firmly.
If the same error message is displayed
again after supplying recording paper
and inserting recording paper tray
firmly, refer to
P.11-52 "[ 6 ]
LOWER PAPER EMPTY".
PAPER EMPTY
When the optional recording paper
trays are not installed:
The paper end sensor have
turned OFF.
When the optional recording paper
trays are installed:
The paper end sensor and
optional paper end sensor have
turned OFF. Or the optional tray
sensors have turned OFF.
Supply recording paper to recording
paper trays. Or insert recording paper
trays firmly.
If the same error message is displayed
again after supplying recording paper
and inserting recording paper tray
firmly, refer to
P.11-51 "[ 4 ] PAPER
EMPTY".
TONER LOW
The remaining toner will go out soon. Replace the toner cartridge with a new
one.
TONER EMPTY
After displaying “TONER LOW”, the
number of print pages has reached
the specified value.
Replace the toner cartridge with a new
one.
DRUM UNIT WARNING
The rest of the drum unit life is 4000
prints or less.
Replace the drum unit with a new one.
REPLACE DRUM UNIT
The drum counter has reached
20,000 pages.
Replace the drum unit with a new one.
CHECK TELEPHONE LINE
Telephone line is not connected to
the telephone line.
Correctly connect a modular phone
cord between the telephone line jack
and the LINE connector on the right
side of the machine.
Display
Cause
Remedy
Summary of Contents for ESTUDIO170F
