Toshiba ESTUDIO170F, Service Manual

Page: 181 / 492

4
January 2005 © TOSHIBA TEC e-STUDIO170F Function Settings
4 - 121
4.2.6 PC FUNC 0-7
The settings here are PC functions, which are divided into 8 tables. Each table has functions of 8 Bits.
By entering 0 or 1 in each Bit, its function can be set. The following are details of each table.
• PC FUNC 0
Remark:
PC FUNC 0 Bit 7:
This switch allows or prohibits use of the PC interface.
PC FUNC 0 Bit 6 and 5:
If “00” is selected, the data is not sent to the PC. If “SUB Address” is selected, the data is sent to
the PC only when the sub address is received from the transmitting party. If “All documents” is
selected, all received data are sent to the PC.
PC FUNC 0 Bit 3:
This bit selects whether or not the journal is sent to the PC.
PC FUNC 0 Bit 2:
This switch allows or prohibits any entry or dialing from the PC.
Used in conjunction with PC interface software.
PC FUNC 0 Bit 1:
This switch allows or prohibits any entry from the PC.
PC FUNC 0 Bit 0:
This switch allows or prohibits scanning directed from the PC.
Bit Contents
Link with User
Function Setting
7 Use of PC Interface:
0: Use prohibited
1: Use allowed
-
6
5
Send the Receive Documents to PC:
PC transfer method at reception
00: No transfer
01: SUB-Address (Only when transferred from the sender)
10: All documents
11: Undefined
-
4 Undefined -
3 Communication Log Management:
Informing of communication journal to PC print
0: Do not inform
1: Inform
-
2 LDC Function:
0: Prohibited
1: Allowed
-
1 Printing Function:
0: Prohibited
1: Allowed
-
0 Scanner Function:
0: Prohibited
1: Allowed
-