Toshiba ESTUDIO170F, Service Manual

Page: 442 / 492

e-STUDIO170F Troubleshooting January 2005 © TOSHIBA TEC
11 - 30
[ 5 ] ERR COUNTER SHIFT [MENU], [9], [5], [05]
This setting is used to shift error count data (on the Error count list) from ACTUAL to HISTORY.
This function can be used to track communication activity to confirm the effectiveness of an adjustment,
and so on.
1) Use the [ Ç ] or [ È ] key to select "05.ERR COUNTER SHIFT", and then press the [ENTER] key.
YES
Shifts the error counter data from ACTUAL to HISTORY. Selecting YES shifts the data on the
ACTUAL side to the HISTORY side, and initializes the ACTUAL side.
NO
Count shift is not performed until the counter reaches 1000 communications.
2) Use the [ Ç ] or [ È ] key to select "1.YES" or "2.NO", and then press the [ENTER] key.
3) When YES is selected, the display shows the following screen then returns to the standby mode
screen. When NO is selected, the display directly returns to the standby mode screen without show-
ing the screen below.
Remark:
After 1000 communications, the error counter data is automatically shifted from ACTUAL to HIS-
TORY.
ERROR COUNTER SHIFT
1 . YES
2 . NO
ACCEPTED