Toshiba ESTUDIO170F, Service Manual

Page: 100 / 492

e-STUDIO170F Function Settings January 2005 © TOSHIBA TEC
4 - 40
6) The screen below is displayed to select options for Multi-polling Report. Use the [ Ç ] or [ È ] keys to
select the desired option, then press the [ENTER] key.
ALWAYS
Prints after every Multi-polling.
ON ERROR
Prints only when an error has occurred in the Multi-polling.
OFF
Disables “print.”
7) The screen below is displayed to select options for Relay Transmission Originator Report.
Use the [ Ç ] or [ È ] keys to select the desired option, then press the [ENTER] key.
Remark:
This menu option will only appear if the unit was setup with the Memory
Clear: ALL (RELAY ON) in the Test Mode.
ALWAYS
Prints after every Relay Transmission.
ON ERROR
Prints only when an error has occurred in transmission.
OFF
Disables “print.”
8) The screen below is displayed to select a document-added option. Use the [ Ç ] or [ È ] keys to select
the desired option (ON or OFF), then press the [ENTER] key.
ON
Adds the document data in the Report.
OFF
Does not add the document data in the Report.
9) After the “COMPLETED” message is displayed, press the [STOP] key to return to the Standby Mode
screen.
MULTIPOLL REPORT
1 . ALWAYS
2 . ON ERROR
3 . OFF
RELAY ORIGINATOR
1 . ALWAYS
2 . ON ERROR
3 . OFF
SHOW FIRST PAGE
1 . ON
2 . OFF