Toshiba ESTUDIO170F, Service Manual

Page: 87 / 492

4
January 2005 © TOSHIBA TEC e-STUDIO170F Function Settings
4 - 27
4.1.5 Automatic Supply Order
[ 1 ] Destination Setup [MENU], [5], [3], [07], [1]
1) Enter the destination fax number using One touch dialing, Abbreviate dialing or keypad dialing, then
press the [ENTER] key.
If the destination fax number has already been registered the following screen is displayed.
You may select one of the following two options.
RE-PROGRAM
Allows you to change the destination fax number.
RETAIN
Retains the destination fax number.
2) After the “SUPPLY ORDER” menu is displayed, press the [STOP] key to return to the Standby Mode
screen.
[ 2 ] Supplies [MENU], [5], [3], [07], [2]
1) The Screen below is displayed to select the desired option (TONER ORDER SETUP, DRUM
ORDER SETUP), then press the [ENTER] key.
TONER ORDER SETUP
Order the Toner cartridge.
DRUM ORDER SETUP
Order the Drum unit.
DESTINATION SETUP
ENTER FAX NUMBER
ALREADY PROGRAMMED
1 . RE-PROGRAM
2 . RETAIN
SELECT SUPPLIES
1 . TONER ORDER SETUP
2 . DRUM ORDER SETUP