Toshiba ESTUDIO170F, Service Manual

Page: 440 / 492

e-STUDIO170F Troubleshooting January 2005 © TOSHIBA TEC
11 - 28
[ 3 ] MEMORY WRITE [MENU], [9], [5], [03]
This function is used to change the contents of a specific backup RAM address (using a 6-digit HEX
code.) Enter the desired address from the dial keypad, and then press the [ENTER] key.
The address is incremented by pressing the [ENTER] key.
Remark:
Under normal circumstances it is not necessary to make changes to the memory write
addresses. It is recommended that changes to these settings be made only in response to a spe-
cific instruction from a Toshiba service representative, service bulletin, or other publication.
1) Use the [
Ç
] or [
È
] key to select "03.MEMORY WRITE", and then press the [ENTER] key.
2) Enter the desired 6-digit address for inputting data, and then press the [ENTER] key.
Remarks:
• To enter the value, use the following keys.
0 to 9: Dial keys
A to F: One touch key 01 to 06
• Be sure to enter the address in the range from 000000 to FFFFFF in HEX code.
3) Enter the data, and then press the [ENTER] key.
4) The screen then increments to the next address. After setting, press the [STOP] key to return to the
standby mode screen.
MEMORY WRITE
ADDRESS = XXXXXX
MEMORY WRITE
DATA = YY
MEMORY WRITE
DATA = ZZ