Toshiba ESTUDIO170F, Service Manual

Page: 9 / 492

1
January 2005 © TOSHIBA TEC e-STUDIO170F Introduction
1 - 3
Security communication:
For transmissions, the facsimile checks if the telephone number of the remote party’s facsimile CSI
matches the number dialed on the unit itself. If it matches, the transmission will start. For receptions,
the facsimile checks if the telephone number of the remote party’s TSI matches any number assigned
to an abbreviated dial number or one touch key. If it matches, the reception will start. Thus transmis-
sions or receptions with any authorized party will be prevented at the earliest stage.
Substitute reception into memory:
When there is no paper remaining in the recording paper tray(s) of the facsimile, when a recording
paper jam occurs, the toner is empty, or printing is already in progress, the received data is stored into
memory instead of being output to recording paper. When the trouble is corrected, or the active printing
job is completed, the received data in memory will then be printed.
Communication options:
If necessary, the function may be changed and options can be selected for page number, line monitor-
ing, turnaround polling, ECM communication and security transmission, etc.
On-hook dialing function:
Manual transmitting procedure is possible with the optional handset on-hook (i.e., without lifting up the
handset), using keypad dialing, abbreviated dialing, or one touch key dialing.
Automatic dialing functions:
1) Dialing with a time designated
Transmitting a document to a designated party at a designated time.
2) Redialing
When an automatic dialing has been performed and the destination party is busy, redialing will be
repeated as many times as programmed with a certain time interval also programmed.
By pressing the [REDIAL] key and selecting the desired item in the menu, redialing of that item
will be performed immediately.
Cover sheet function:
This facsimile has a fax cover sheet preparation feature built in, allowing the operator to enter the desti-
nation name, sender name at the time of the document transmission. This cover sheet also allows
image data, such as a company logo, to be included.
Account code:
By entering a different account code for each destination at the time of transmission, account codes will
identify when, for whom, and to whom a particular fax message was sent.
Department code:
Permits assigning 50 department codes to control access and track activity. These codes are setup
beforehand, and must be used to access machine functions.
List output:
This allows the operator to print data stored in the RAM (reservation list, preset dial number lists, func-
tion list, communication journal, transmission report, etc.).
Copying function:
This facsimile allows the local printing of documents. This feature effectively provides a convenience
copying function.
LCD (Liquid Crystal Display):
It can display the operation menu, telephone numbers, station names, and error messages using
alphanumeric characters.