Toshiba ESTUDIO170F, Service Manual

Page: 447 / 492

11
January 2005 © TOSHIBA TEC e-STUDIO170F Troubleshooting
11 - 35
[ 3 ] FUNCTION [MENU], [9], [6], [03]
This list outputs the status of the service technician settings. The following are the items to be recorded.
The contents currently set are output in binary format.
• FUN 0 to 39
Tables of general machine functions.
• TELFUNC 0 to 8
Tables of general machine functions.
• PCFUNC 0 to 7
Activate and select PC interface functions.
• HOME 0 to 2
Tables of data on scanning system.
• UAD 0 to 19
Tables of special functions used to adjust the unit to the telephone specifications of each country/
region.
• EX TYPE 1
Tables relating to telephone exchange functions.
• ACC DGT 1 to 2
Tables of functions relating to access digits.
1) Use the [ Ç ] or [ È ] key to select the "03.FUNCTION", and then press the [ENTER] key.
2) After completion of the list output, the display returns to the standby mode screen. For a sample list,
refer to P.12-3 "12.1.3 Function List for Maintenance".
[ 4 ] DRUM HISTORY [MENU], [9], [6], [04]
This list is output to confirm information relative to the drum currently in the machine as well as previous
drum units. The following are the items to be recorded.
ACTUAL
TOTAL PRINT: Total number of recorded pages (on this machine) up to this moment.
DRUM COUNTER: Total number of recorded pages (no this drum) up to this moment.
A4/LT, LG: The number of recorded pages by paper sizes.
HISTORY
Data obtained before drum replacement/drum counter clear.
1) Use the [ Ç ] or [ È ] key to select the "04.DRUM HISTORY", and then press the [ENTER] key.
2) After completion of the list output, the display returns to the standby mode screen. For a sample list,
refer to P.12-4 "12.1.4 Drum Unit".