Toshiba e-STUDIO305CP, Printing Manual

Page: 42 / 142

2 PRINTING FROM WINDOWS
40 Setting Up Print Options
4) Paper Source
This selects a paper source to print a job in the most suitable paper size. The figure on the right indicates
the paper size set for each paper source. When you select a paper source, the chosen one is indicated
with a green square in the figure.
You can select a paper source by directly clicking on the figure on the right.
- Auto — Automatically selects the paper set in this equipment according to the printed document size.
- Drawer 1 — Paper is fed from the 1st Drawer.
- Drawer 2 — Paper is fed from the 2nd Drawer.
- Drawer 3 — Paper is fed from the 3rd Drawer.
- Drawer 4 — Paper is fed from the 4th Drawer.
- LCF — Paper is fed from the Large Capacity Feeder. This cannot be selected if the Large Capacity
Feeder is not installed.
- Bypass Tray — Paper is fed from the Bypass Tray. When this is selected and print a job, [JOB
STATUS] on the touch panel will blink. Press [JOB STATUS] and check the paper size of the job. Then
set the paper and press the [START] button to print a job.
- External LCF — Paper is fed from the External Large Capacity Feeder. This cannot be selected if the
External Large Capacity Feeder is not installed.

When you select the bypass tray as a paper source but the orientations of the original and the paper
on the bypass tray differ, the data in the original are rotated for 90 degrees and printed in the same
orientation as that of the original, as long as their paper sizes are the same (this is available only for
A4, B5, LT and 16K). For example, when an original is A4 in a portrait direction but the paper on the
bypass tray is A4-R, the data of the original are printed in A4 in a portrait direction.
 The selectable values vary depending on the optional devices installed in this equipment and their
configuration on the [Device Settings] tab.
 When a paper type such as special or tab paper that needs to be fed from the bypass tray is set,
[Bypass Tray] may be automatically selected in the [Paper Source] box, and then a confirmation
dialog box may appear.
 When the paper size settings on the [Device Settings] tab differ from those in the equipment, the
paper source setting is ignored and the equipment may prompt to set the paper in the bypass tray.
 The Large Capacity Feeder is not available for some countries or regions.
5) Paper Type
This sets the media type of the paper.
- Plain (Auto) — Select this when printing on plain paper.
- Plain (Thin) — Select this when printing on plain thin paper.
- Plain — Select this when printing on plain paper.
- Recycled — Select this when printing on recycled paper.
- Thick1 — Select this when printing on thick 1 paper.
- Thick2 — Select this when printing on thick 2 paper.
- Thick3 — Select this when printing on thick 3 paper.
- Thick4 — Select this when printing on thick 4 paper.
- Thick5 — Select this when printing on thick 5 paper.
- Special 1 — Select this when printing on special 1 paper.
- Special 2 — Select this when printing on special 2 paper.
- Special 3 — Select this when printing on special 3 paper.
- Special 4 — Select this when printing on special 4 paper.
- Special 5 — Select this when printing on special 5 paper.
- Special 6 — Select this when printing on special 6 paper.
- Transparency — Select this when printing on transparent sheets.
- Plain1 — Select this when printing on plain 1 paper.
- Plain2 — Select this when printing on plain 2 paper.
- Thin — Select this when printing on thin paper.
- Envelope — Select this when printing on envelope.
- Envelope 1 — Select this when printing on envelope 1.