Toshiba e-STUDIO305CP, Printing Manual

Page: 19 / 142

2.PRINTING FROM WINDOWS
Before Using the Printer Driver 17
2 PRINTING FROM WINDOWS
3
Display the [Device Settings] tab menu, and set the following options.
Model — This sets the model type. The setup items of the printer driver are changed according to the
model selected.
Selecting [Universal] restricts the printer driver functions to those common to all printers on the
network, which is convenient for using other printers with your printer driver.
Option — This option sets whether the following optional devices are installed.
 Drawers — This sets whether or not the Paper Feed Unit (2nd drawer), Paper Feed Pedestal (3rd
drawer), Drawer Module (4th drawer) or Large Capacity Feeder is installed.
 Finisher — This sets whether or not the Finisher, Saddle Stitch Finisher, Hanging Finisher, Inner
Finisher, Job Separator or Offset Tray is installed.
 Hole Punch Unit — This sets whether or not the Hole Punch Unit is installed.

External LCF — This sets whether or not the External Large Capacity Feeder is installed.
 Inserter Unit — This sets whether or not the Inserter Unit is installed.
 Automatic Duplexing Unit — This sets whether or not the Automatic Duplexing Unit is installed.
 Hard disk — This sets whether or not the Hard disk is installed.
The Large Capacity Feeder is not available for some countries or regions.
 Setup items differ depending on the model and the option configuration.
 For more information about each item, see the descriptions about the [Device Settings] tab.
 P.85 “[Device Settings] tab”
 If you set any options on the [Device Settings] tab without two-way communications between this
equipment and your computer, 2-sided printing is automatically enabled.
4
Click [Drawer Settings].
The [Drawer Settings] dialog box appears.