Toshiba e-STUDIO305CP, Printing Manual

Page: 134 / 142

2 PRINTING FROM WINDOWS
132 Printing With Best Functions for Your Needs
When the paper is being fed into the equipment from the bypass tray
 Do not mix different sizes of paper.
 Feed paper sheet by sheet from the bypass tray if you have set more than one copy at [Number of
Copies].
 Slightly curl the paper. Hold it gently as it is being fed into the equipment.
 Be careful not to cut your fingers on the edge of paper when you hold it.
 Make sure that the trailing edge of the paper will not be fed into the equipment while you are holding it.
 Printing is done at 300 dpi if the custom paper size is longer than the maximum standard paper size: for
example, the maximum custom size is 12.34 x 47.24 inches (313.4 x 1200 mm).
 e-STUDIO527S Series: Printing is done at 600 dpi if the custom paper size is longer than the maximum
standard paper size: the maximum custom size is 8.50 x 52.00 inches (215.9 x 1320.8 mm). Even if
1200 dpi is selected, it is changed to 600 dpi.
When the paper is coming out of the equipment
 Support the paper gently as it is coming out of the equipment.

Be careful not to cut your fingers on the edge of paper when you support it.

Do not pull out the paper forcibly as it is exiting from the equipment.