Toshiba e-STUDIO 352 Operator'S Manual Download Page 94

Page: 94 / 364

3.SETTING OF BASIC COPY MODES

1.Paper Selection (Cont.)

Select either automatic paper selection (APS) or automatic magnifica-
tion selection (AMS).

Automatic paper selection:

Copies on the same size of paper as that of originals (

P.88).

Automatic magnification selection:

Copies all in one size (

P.93).

• Before you use automatic paper selection, be sure that all paper sizes corresponding to the original sizes have

been set in the drawers.

• In automatic magnification selection, the copies cannot be enlarged from, A4 (portrait)/B5 (portrait) to A3 (land-

scape)/B4 (landscape).

• If “Change direction of original” appears when [AMS] is used with [MIXED ORIGINAL SIZES], change the

direction according to the message.

• Set other copy modes as required.

Press the [START] button.

Summary of Contents for e-STUDIO 352













































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO 352

Reviews:

Related manuals for e-STUDIO 352

Brands by name

Popular brands

Toshiba e-STUDIO 352, Operator'S Manual

Search results

Summary of Contents for e-STUDIO 352

Reviews:

Related manuals for e-STUDIO 352

Brands by name

Popular brands