Toshiba e-STUDIO 352, Operator'S Manual

Page: 114 / 364

112
3.SETTING OF BASIC COPY MODES
3.Selecting Finishing Modes (Cont.)
3
2
Press the [Stapling position] button to switch the stapling position.
Stapling positions are the front and the other end.
The stapling position lamp corresponding to the selected stapling position lights in green.
3
Place paper in the lower tray of the finisher.
Jog the paper well and place it with its face down.
Place the paper in front to have it stapled in the front, and in the other end to have it stapled in the
other end.
Check that the manual-stapling lamp lights in green. If not, place the paper again.
4
Release the paper and press the [Manual-stapling] button.
The stapling position lamp blinks when the stapling is completed. Remove the paper.
Be sure to release the paper before the manual stapling.
• Operation can be continued while the manual-stapling lamp lights. If no operation is performed for approx. 15
min., the manual stapling operation is stopped.
• If you want to stop the manual stapling operation during setting, remove paper and press the [Manual-stapling]
button. The shutter in the paper exit area is closed and the operation of the manual stapling is finished.
Specification
Acceptable paper size LD, LG, LT, LT-R, COMP, 13 LG, 8.5” SQ, 8K, 16K, A3, A4, A4-R, B4,
FOLIO
Maximum number of sheets
for stapling
50 sheets (LT, 8.5” SQ, 16K, A4: 64 - 80 g/m
2
)
30 sheets (LD, LG, LT-R, COMP, 13 LG, 8K, A3, A4-R, B4, FOLIO: 64 - 80
g/m
2
)
30 sheets (LT, 8.5” SQ, 16K, A4: 81 - 105 g/m
2
)
15 sheets (LD, LG, LT-R, COMP, 13 LG, 8K, A3, A4-R, B4, FOLIO: 81 -
105 g/m
2
)
Stapling position Front, Rear