Toshiba e-STUDIO 352 Operator'S Manual Download Page 78

Page: 78 / 364

2.HOW TO MAKE COPIES

3.Bypass Copying (Cont.)

Bypass copying on standard size paper

Copying on A3, A4, B4 and B5 size paper

Place the original(s).

Press the button of the same size as the one of the paper you have set
on the tray.

• If the paper size is not specified here, copying may be slowed down.

Place some sheets of paper with their
copy side down on the bypass tray. Align
the side guides to the paper length while
holding A.

• The message “Ready for bypass feeding” appears.
• Rear side of the side guides of the bypass tray has an indicator

for paper height. The height of the sheets must not exceed this
indicator.

• When you use more than one sheet, fan the sheets well before

setting them on the tray.

• Do not push the sheets into the entrance of the bypass feeder;

this may cause a paper jam.

When the paper size is larger, draw out the three-stage paper
holder. Raise B when you use A3 or a larger size of paper.

Summary of Contents for e-STUDIO 352













































































































































































































































































































































































Search results

Summary of Contents for e-STUDIO 352

Reviews:

Related manuals for e-STUDIO 352

Brands by name

Popular brands

Toshiba e-STUDIO 352, Operator'S Manual

Search results

Summary of Contents for e-STUDIO 352

Reviews:

Related manuals for e-STUDIO 352

Brands by name

Popular brands