Toro Dingo TX 525, Service Manual

Page: 96 / 554

ENGINE
4-43 TX525 Service Manual Rev. 000
12. Remove the drive belt from around the engine pulley
(Fig. 0233).
Fig 0233 PICT-4862
13. Secure the flywheel to keep it from turning. You
can do this by sliding a length of 5/16” diameter rod
stock in between the fan mount pulley and fan mount
spacer. The rod stock should be inserted so it runs
on top of the fan mount pulley screw. The rod stock
should be at least 16” (40.6cm) long so that it rests
on the left hand loader arm lift cylinder (Fig. 0234).
Fig 0234 PICT-4840
14. Using a 6mm Allen socket, remove the 5 bolts secur-
ing the engine pulley to the flywheel (Fig. 0235).
Fig 0235 PICT-4856
15. Remove the engine pulley (Fig. 0236).
Fig 0236 PICT-4857