Toro Dingo TX 525, Service Manual

Page: 156 / 554

ENGINE
4-103 TX525 Service Manual Rev. 000
27. 90 degree oil drain fitting only: Use a new rubber
sealing washer. Thread the locking nut up against
the sealing washers as shown (Fig. 0466).
Fig 0466 PICT-5554a
28. 90 degree oil drain fitting only: Thread the oil drain
fitting into the oil pan until the washers rest against
the oil pan. Position the oil drain fitting as shown.
Using a 1” wrench to hold the oil drain fitting, use a
1-1/8” wrench to tighten the jam nut up against the
washers (Fig. 0467).
Fig 0467
PICT-5555a
30. Apply thread locking compound to the 3 fan mount
spacer bolts (Fig. 0469).
Fig 0469
PICT-5540a
29. Straight oil drain fitting only: Use a new rubber
seal ing washer. Using a 1-1/8” wrench, install the oil
drain fitting into the oil pan and tighten (Fig. 0468).
Fig 0468 PICT-8723a