ENGINE
4-113
TX525 Service Manual
Rev. 000
11. Using a 9/16” socket and wrench, install 2 nuts
securing the engine mount plate to the left hand
engine mount (Fig. 0504).
Fig 0504
PICT-5487
12. Torque the 2 bolts to 30
+
3 ft-lbs. (41
+
4 Nm) (Fig.
0505).
Fig 0505
PICT-5577
13. Position the engine into the mainframe aligning the
mounting holes on the engine mount plates with the
mounting holes in the mainframe.
14. Remove the engine hoist from the engine.
15. Using a 9/16” socket and wrench, loosely install the
rear 2 bolts and nuts securing the left hand side of
the engine assembly to the mainframe (Fig. 0506).
Fig 0506
PICT-5484
16. Using a 9/16” socket and wrench, loosely install the
rear 2 bolts and nuts securing the right hand side of
the engine assembly to the mainframe (Fig. 0507).
Fig 0507
PICT-5481
Summary of Contents for Dingo TX 525
