Toro Dingo TX 525, Service Manual

Page: 430 / 554

DRIVE SYSTEM
7-53 TX525 Service Manual Rev. 000
B. Right pump case drain line (Fig. 1463).
Note: A 7/8” wrench may need to be used to hold
the fitting while tightening the hydraulic line.
Fig 1463 PICT-4613
A. Hydraulic oil inlet from the filter (Fig. 1464).
Fig 1464 PICT-4612
18. Position the right hand panel onto the control panel
assembly (Fig. 1465).
A. Self-tapping screw (3) B. Bolt and nut
Fig 1465 PICT-4269
19. Using a 3/8” socket, install 3 self-tapping screws that
secure the right panel to the control panel assembly.
Using a 3/8” socket and a 7/16” socket, install a bolt
and nut securing the lower left corner of the right
panel to the control panel assembly (Fig. 1466).
Fig 1466 PICT-4341
A
A
A
B