Toro Dingo TX 525, Service Manual

Page: 35 / 554

MAINTENANCE
3-12 Rev. 000 TX525 Service Manual
10. Place an absorbent towel under the oil cooler inlet
fitting located on the lower left hand corner of the oil
cooler.
11. Using a 1-1/16” and a 1-1/8” wrench, remove the oil
cooler inlet line from the oil cooler inlet fitting (Fig.
0026).
14. Using a 1-1/16” and a 1-1/8” wrench, remove the oil
cooler outlet line from the oil cooler outlet fitting (Fig.
0027).
Fig 0026 PICT-4965
Fig 0027 PICT-4968a
15. Cap the hydraulic line and fitting so debris does not
enter the system.
16. Using a 1/2” socket, remove the 3 bolts securing the
radiator mount to the frame (Fig. 0028).
12. Cap the hydraulic line and fitting so debris does not
enter the system.
13. Place an absorbent towel under the oil cooler outlet
fitting located on the upper right hand corner of the
oil cooler.
Fig 0028 PICT-4969