Toro Dingo TX 525, Service Manual

Page: 228 / 554

ENGINE
4-175 TX525 Service Manual Rev. 000
16. Draw out the shaft assembly with the drive lever and
the overrunning clutch from the housing (Fig. 0740).
18. Using a 12mm socket, drive the collar off the circlip
on the shaft assembly (Fig. 0742).
Fig 0740 PICT-8045a Fig 0742 PICT-8048a
19. Remove the circlip from the shaft assembly (Fig.
0743).
17. Remove the starter housing from the vise and clamp
the shaft assembly into the vise with the clutch
assembly facing up (Fig. 0741).
Fig 0743 PICT-8050a
Fig 0741 PICT-8047a