Toro Dingo TX 525, Service Manual

Page: 161 / 554

ENGINE
4-108 Rev. 000 TX525 Service Manual
44. Measure the deflection (A) by depressing the belt
halfway between the fan drive pulley and alternator
pulley at the specified force of 22 lbs. (98 N, 10kgf)
(Fig. 0484).
45. If the deflection measurement is not within the fac-
tory specifications, loosen the alternator mounting
screws and relocate the alternator to adjust.
46. Using a 12mm socket and a 9/16” wrench, tighten
the nut securing the hex spacer to the engine oil
dipstick (Fig. 0485).
Fig 0484 fig. 3EEAB...17B
Fig 0485 PICT-5170
A. .28 - .35” (7 – 9mm)
A
47. Position the starter assembly into the engine (Fig.
0486).
Fig 0486 PICT-5566
48. Using a 12mm socket, install 2 bolts and lock-
washers securing the starter assembly to the engine
(Fig. 0487).
Fig 0487 PICT-5567a