Toro Dingo TX 525, Service Manual

Page: 233 / 554

ENGINE
4-180 Rev. 000 TX525 Service Manual
Starter Assembly Rebuild
1. Slide the shaft into the gear (Fig. 0758).
4. While supporting the shaft, slide a washer onto the
shaft (Fig. 0760).
Fig 0758 PICT-8085a
Fig 0760 PICT-8090a
5. While supporting the shaft, install a snap ring (Fig.
0761).
2. Secure the bearing assembly in a vise.
3. Insert the shaft/gear assembly into the bearing
assembly (Fig. 0759).
Note: There is a tab on the gear and bearing for
alignment.
Fig 0761 PICT-8092a
Fig 0759 PICT-8088