Toro Dingo TX 525, Service Manual

Page: 442 / 554

DRIVE SYSTEM
7-65 TX525 Service Manual Rev. 000
12. Position the fuel tank into the rear end of the frame.
Connect the two wires (black and orange) to the fuel
sending unit located on the top of the fuel tank (Fig.
1508).
Fig 1508 PICT-4262a
13. Position the fuel tank bracket onto the fuel tank (Fig.
1509).
A. Center terminal (orange wire)
B. Outside terminal (black wire)
Fig 1509
PICT-5626
11. Connect the fuel lines to the fuel tank fittings. Note
the location markings. Secure the fuel lines with
hose clamps (Fig. 1507).
S - Fuel suction line
R - Fuel return line
Note: Before installing the fuel tank in the unit,
disengage the park brake and start the unit.
Refer to “Purging Air Procedure” on page
9-19. Check for any leaks in the hydraulic
fittings and hydraulic hoses.
Fig 1507 PICT-4265
A
B