DRIVE SYSTEM
7-42
Rev. 000
TX525 Service Manual
D. Hydraulic hose running to the lower port on the
right hand wheel motor and,
E. Hydraulic hose running to the upper port on the
right hand wheel motor (Fig. 1419).
Fig 1419
PICT-4608
F. Hydraulic hose running to the lower port on the
left hand wheel motor and
G. Hydraulic hose running to the upper port on the
left hand wheel motor (Fig. 1420).
Fig 1420
PICT-4609
13. Using a 15/16” wrench, disconnect the left hand
hydraulic pump lines (just marked) as follows:
A. Hydraulic oil inlet from the filter (Fig. 1421).
Fig 1421
PICT-4612
B. Right pump case drain line (Fig. 1422).
Note: A 7/8” wrench may be used to hold the fitting
while loosening the hydraulic line.
Fig 1422
PICT-4613
Summary of Contents for Dingo TX 525
