Chapter 3: Operating the system
98-126882-B
Using a phone or fax machine
35
Sending a fax message to the terminal
To send a fax message to the terminal, dial
+ <Mobile number> #
•
+
is the prefix used in front of the country code for international calls.
•
Mobile number
. The first part of the mobile number is always 870, which is the “country code”
for the BGAN system. Use the 3.1 kHz mobile number if you are calling a G3 fax and the UDI
number if you are calling an ISDN G4 fax connected to the terminal. If the mobile numbers are
listed in the web interface, you can look them up as follows:
Connect a computer, access the web interface and select
PHONE BOOK
>
Mobile numbers
. For
further information, see
Viewing and editing the mobile numbers
on page 51.
If the mobile numbers are not available in the web interface, refer to your airtime
subscription.
Receiving a fax message
An analog fax machine connected to the terminal can only receive a fax with 3.1 kHz Audio. Refer
to
Selecting the incoming call type
on page 27.
An ISDN G4 fax machine connected to the EXPLORER 727 terminal can only receive a fax with UDI.
Note
There are four mobile numbers, one for 3.1 kHz Audio, one for Standard Voice, one
for UDI and one for RDI.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
