Chapter 4: Using the web interface
98-126882-B
Selecting the preferred BGAN satellite
94
Selecting the preferred BGAN satellite
Overview
By default the terminal is set up to automatically find the most appropriate satellite to connect to
(“Auto” mode). However, if you are located in an area with more than one BGAN satellite
available, you can select the satellite you prefer to use when registering on the BGAN network.
To select the preferred BGAN satellite
Do as follows:
1.
Select
SETTINGS
>
Satellite selection
from the left navigation pane.
2.
Select the satellite you prefer to use.
If you select
Auto
(the default setting) the EXPLORER 727 system automatically uses the most
appropriate satellite.
Note that at this writing the POR satellite is not yet available.
3.
Click
Apply
.
Note
If you have selected one of the satellites, your EXPLORER 727 system will only try to
register on the selected satellite. This means that if the antenna is outside the coverage
area for that satellite, the EXPLORER 727 system will not be able to register with the
BGAN network.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
