Chapter 2: Getting started
98-126882-B
Connecting the IP handset
15
Connecting the IP handset
Power supply
The Thrane & Thrane IP handset is powered from the LAN interface, using Power over Ethernet.
Starting up the IP handset
The following procedure is for the Thrane & Thrane IP handset. The procedure may be different for
another type of IP handset.
Do as follows:
1.
Connect the Thrane & Thrane IP handset to one of the LAN (PoE) connectors on the terminal
as described in the user manual for the handset.
The handset starts up automatically.
2.
If your SIM card requires a PIN and the PIN has not yet been entered in the terminal, you can
enter the PIN from the BGAN menu of the IP handset.
To enter the PIN, select
BGAN > Enter PIN
from the handset menu system (note that this menu
item is only available if the PIN has not yet been entered). Then type in the Administrator user
name and password followed by the PIN for the terminal.
For further information on the IP handset, refer to the user manual for the handset.
Note
The first handset that is connected to the LAN interface on the terminal is automatically
registered in the terminal and assigned the local number 0501 and password 0501. For
information on how to connect additional handsets, see
Connecting a new IP handset
on
page 75.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
