Chapter 4: Using the web interface
98-126882-B
Setting up the interfaces
64
Configuring the Phone/Fax interface
Do as follows:
1.
Select
SETTINGS
>
Phone/Fax
from the left navigation pane.
2.
For each Phone/Fax port, set the call type for incoming and outgoing calls.
The call types are described in more detail in
Selecting the call type
on page 26.
• For
Incoming calls
, you can check Standard or 3.1 kHz Audio or both.
If you check both, any device connected to the Phone/Fax interface will react (ring) on
incoming calls.
If you select e.g. Standard, the Phone/Fax interface will only react on calls made to the
Standard phone number.
• For
Outgoing calls
, you can select either Standard or 3.1 kHz Audio. The selected type will
be used by default, if possible, for any outgoing call. Note, however, that fax machines and
modems must use 3.1 kHz Audio.
3.
Click
Apply
.
Note
Port 1 is the connector closest to the antenna connector, and Port 2 is the connector
closest to the ISDN connector.
Note
You can override the default setting for outgoing calls by dialing 1* (force the call to
Standard) or 2* (force the call to 3.1 kHz Audio) before the number. For further
information, see
Overriding the default outgoing call type
on page 26.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
