Chapter 2: Getting started
98-126882-B
Connecting a computer
16
Connecting a computer
Before connecting to the LAN interface
For the LAN (Local Area Network) interface to work without any further setup, the connected
computer must be set up to obtain an IP address and a DNS server address automatically.
Connecting a computer to the LAN interface
Do as follows:
1.
Power up your computer.
2.
Connect your LAN cable between the network connector on your computer and one of the LAN
connectors on the terminal.
3.
When the computer and the terminal are ready, check the connection e.g. by accessing the
built-in web interface of the terminal with your browser. For further information, see
Accessing the web interface
on page 41.
You may have to disable the Proxy server settings in your browser. For further information,
see
Browser settings
on page 40.
For information on how to configure the LAN interface on the terminal, see
Configuring the LAN
interface
on page 61.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
