Chapter 4: Using the web interface
98-126882-B
Setting up the interfaces
79
Configuring the I/O interface
To configure the I/O pins, do as follows:
1.
Select
SETTINGS
> Discrete I/O
.
2.
For each pin you want to use, select
Enabled
.
3.
For each pin, select if the pin should be
Active high
or
Active low
.
4.
If you are using the Ignition function and you want the terminal to stay on for a few minutes
after the Ignition is switched off, enter the number of minutes under
DELAYED SHUTDOWN
.
For further information on the Ignition function, see
Using the ignition system
on page 13.
5.
If you are using a ringer output, select the incoming call types that should activate the ringer
under
RINGER OUTPUT
.
6.
If you are using a Mute output, select the incoming call types that should activate the Mute
function under
MUTE OUTPUT
.
7.
Click
Apply
.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
