Chapter 3: Operating the system
98-126882-B
Using a phone or fax machine
27
Example:
To make a call to Thrane & Thrane in Denmark (+45 39558800), forcing the connection
to use Standard Voice, dial
1* 0045 39558800
followed by
#
if calling from an analog or
ISDN phone, or off-hook key if calling from an IP handset.
Phone numbers for incoming 3.1 kHz Audio and Standard Voice
3.1 kHz Audio and Standard Voice have separate phone numbers. This way, a person calling a
phone connected to the terminal can select whether to use 3.1 kHz Audio or Standard Voice, simply
by using the dedicated phone number.
If the mobile numbers are listed in the web interface, you can look them up as follows:
Connect a computer, access the web interface and select
PHONE BOOK
>
Mobile numbers
. For
further information, see
Viewing and editing the mobile numbers
on page 51.
If the mobile numbers are not available in the web interface, refer to your airtime subscription.
For information on how to make a call to the terminal, see
Making a call to the terminal
on
page 29.
Selecting the incoming call type
To select which call types are accepted for an incoming call, use a computer and the web interface.
•
ISDN
. Select the call type under
SETTINGS > ISDN
.
For further information, see
Configuring the ISDN interface
on page 65.
•
Phone/Fax.
Select the call type for each port under
SETTINGS > Phone/Fax
.
For further information, see
Configuring the Phone/Fax interface
on page 64.
•
IP handset.
Select the call type for each handset in the web interface under
SETTINGS >
IP Handset > Call settings
. For further information, see
Setting the call types for IP handsets
on
page 77.
Note
This will not change the default call type, only the type used for the ongoing call.
Note
The call type you are using must be selected in the web interface
(refer to the next
section).
Note
There are two Voice numbers, one for 3.1 kHz Audio and one for Standard Voice.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
