Chapter 4: Using the web interface
98-126882-B
Using the Dashboard
46
Properties
The
PROPERTIES
section of the
DASHBOARD
shows the following information:
•
Airtime provider.
The name of your Airtime Provider.
•
GPS position.
The GPS position of your EXPLORER 727 system.
•
Status
. The status of the terminal and antenna.
Examples of status information are: Scanning, Ready and Data active.
•
Satellite selection
. The satellite selected for logon. For further information, see
Selecting the
preferred BGAN satellite
on page 94.
•
Unit serial number
. The serial number of the terminal.
•
Software version
. The version of the software embedded in the terminal.
•
Local IP address
. The local IP address of the terminal. This is the IP address used to access the
terminal from a device connected to the terminal.
•
IMEI number
. The IMEI number (International Mobile Equipment Identity) of the terminal.
This is a unique number that identifies your terminal.
•
MAC address
for the LAN interface in the terminal.
•
Antenna status
. The status of the antenna.
Managing data sessions
Overview
Data sessions are displayed under
PROFILES ON LAN
or
STREAMING PROFILES ON LAN
at the
bottom of the
Dashboard
.
•
Primary profiles are listed in the left side and secondary profiles (if any) are listed to the right.
•
Profiles that are currently active are displayed as a link with the text “Stop <name of profile>”.
•
Profiles that are ready to be activated are displayed as a link with the text “Start <name of
profile>”.
Summary of Contents for Explorer 727
Page 1: ...JH G B6CJ6A MEADG G...
