Operation
Instrument Controls Menu
Thermo Electron Corporation
Model 42
i
Low Source Instruction Manual
3-61
Table Point
The Table Point submenu allows the user to set up an individual table
point.
•
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel >
Point 1-10
.
Volts
The Volts screen allows the user to set the input voltage for the selected
table point in the conversion table from 0.00 to 10.50. The default table is a
two-point table with point 1: 0.00 V = 000.0 U and point 2: 10.00 V =
10.0 U.
•
In the Main Menu, choose Instrument Controls > I/O Configuration >
Analog Input Config > Select Channel > Select Point >
Volts
.
•
Use
and
to move the cursor up and down.
•
Press
to save the new value.
TABLE POINT 01 CONFIG:
>VOLTS 0.00
USER VALUE 0.00
RANGE AVG DIAGS ALARM
TABLE POINT 01 VOLTS:
CURRENTLY: 0.00
SET TO: 00.0
0
§¨
MOVE CURSOR
©ª
CHANGE VALUE
SAVE
RANGE AVG DIAGS ALARM
Summary of Contents for 42i
