C-Link Protocol Commands
Communications Configuration
B-38
Model 42
i
Low Source Instruction Manual
Thermo Electron Corporation
where xxxx = 4 hexadecimal digits that represent the sum of all the
characters (bytes) in the message
host name
This command reports the host name string.
Send:
host name
Receive:
host name ISERIES
set host name
string
This command sets the host name
string
, where
string
is 1-13 alphanumeric
characters.
Send:
set host name analyzer01
Receive:
set host name analyzer01 ok
instr name
This command reports the instrument name.
Send:
instr name
Receive:
instr name
NO-NO2-NOx Analyzer
NO-NO2-NOx Analyzer
instrument id
This command reports the instrument id.
Send:
instrument id
Receive:
instrument id 42
set instrument id
value
This command sets the instrument id to
value,
where
value
is a decimal
number between 0 and 127 inclusive.
Note
sending this command via RS-232 or RS-485 will require the host to
use the new id for subsequent commands.
Send:
set instrument id 50
Receive:
set instrument id 50 ok
Table B-9.
Reply Termination Formats
Format
Reply Termination
00
<CR>
01
<NL> sum xxxx <CR>
Summary of Contents for 42i
